Petrol & Diesel Timing Tools
You have selected Petrol & Diesel Timing Tools. Browse through our range of Petrol & Diesel Timing Tools by clicking on the products or links below, or search the Petrol & Diesel Timing Tools section by typing your keywords or product code in the search bar above.
| Showing 1 to 20 of 55 results Page : 1 2 3 next > |
Quick Find Code: SEAVSE1901
RRP : £29.94 Our Price : £16.76 (Inc VAT)
|
Set of camshaft and crankshaft locking pins for Renault diesel and petrol engines.Suitable for locking engine during cam belt replacement or during associated engine maintenance. |
Quick Find Code: SEAVS173
RRP : £27.54 Our Price : £15.42 (Inc VAT)
|
Adjustable legs allow insertion of pegs into holes in camshaft pulleys.Suitable for coarse and fine positioning of camshaft for timing on a variety of engines including Ford Zeta and Zetec. |
Quick Find Code: SEAVS783
RRP : £64.74 Our Price : £33.66 (Inc VAT)
|
Designed to remove and install fan clutch and rotate or restrain the camshaft pulley.Adjustable jaw spread and interchangeable pins.Supplied in storage case. |
Quick Find Code: SEAVSE170
RRP : £89.94 Offer Price : £31.96 (Inc VAT)
|
Anodised aluminium chocks suitable for locking camshaft pulleys on twin cam engines.Set includes flywheel locking tools for selected PSA (Citroen/Peugeot) and Vauxhall/Opel petrol and diesel engines. |
Quick Find Code: SEAVSE5048
RRP : £41.94 Our Price : £27.68 (Inc VAT)
|
Used to counter-hold the crankshaft pulley when loosening/tightening the retaining bolt.Suitable for most Honda vehicles fitted with hydraulic PAS.Use with 1/2"Sq drive breaker bar. |
Quick Find Code: SEAVSE4143.32
RRP : £7.14 Our Price : £4.86 (Inc VAT)
|
Pin is screwed into the side of the engine to locate the crankshaft in the timed position.Applies to Zetec/Duratec engines in Fiesta, Fusion and Focus.Also suitable for some Mazda and Volvo vehicles. |
Quick Find Code: DR57629
RRP : £41.52 Our Price : £24.66 (Inc VAT)
|
13 PIECE DIESEL AND PETROL ENGINE TIMING KIT For use on Audi, Citroën, Peugeot, Volkswagen and Volvo petrol and diesel engined cars and light commercial vehicles. Manufactured from mild steel with plated finish. Display packed in blow mould storage case. |
Quick Find Code: DR31486
RRP : £17.90 Our Price : £12.48 (Inc VAT)
|
EXPERT 41MM 1/2" SQUARE DRIVE WATERPUMP WRENCH Expert Quality, manufactured from EN8 carbon steel plate hardened and tempered with zinc plated finish. Adjusts the tension of the timing belt, by rotating the waterpump. Suitable for GM (Vauxhall/Opel) engines, 1987 onwards (types LZ and SV) and Daewoo Nexia (1.5 OHC) Nexia and Espero (1.5 DOHC). Display packed. |
Quick Find Code: SEAVS1284
RRP : £35.94 Our Price : £24.26 (Inc VAT)
|
It is often necessary to remove the crankshaft pulley when replacing the timing belt.The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal.Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing.This locking tool securely locates in the teeth and fixes to the housing using manufacturer's guidelines. |
Quick Find Code: SEAVSE5734
RRP : £47.94 Our Price : £31.64 (Inc VAT)
|
Renault 1.4 and 1.6 16v petrol engines require the sprockets to be free to turn if timing adjustments are necessary.This bracket is used to hold the camshaft sprocket whilst releasing the centre bolts.Use in association with VS4960. |
Quick Find Code: SEAVSE180
RRP : £159.54 Our Price : £79.78 (Inc VAT)
|
Updated kit of camshaft, crankshaft and flywheel locking tools with wide general coverage suitable for a range of popular diesel and petrol engines.Suitable for use when carrying out timing belt changes.Includes updated flywheel locking tools for VW with round and oval profile teeth. |
Quick Find Code: DR71174
RRP : £17.98 Our Price : £12.54 (Inc VAT)
|
EXPERT EXP QUALITY FLYWHEEL HOLDING TOOL Expert Quality, for holding flywheels on popular Citroën, Fiat and Peugeot vehicles. Display packed. |
Quick Find Code: DR43058
RRP : £121.66 Our Price : £68.98 (Inc VAT)
|
EXPERT UNIVERSAL BELT TENSION TESTER Expert Quality, to adjust the tension on drive belts on various serpentine and camshaft belt thicknesses. Adjustable dual scale graduations readable from front and back of tool. Manufactured from good quality steel with knurled aluminium rotating knob for easy setting. Display packed. |
Quick Find Code: SEAVSE5753
RRP : £23.94 Offer Price : £15.95 (Inc VAT)
|
Auxiliary belt tension tool for V-ribbed belts.Compatible with a wide variety of VAG engines.Use with a standard 1/2"Sq drive ratchet or extension bar. |
Quick Find Code: SEAVS1301
RRP : £59.94 Our Price : £38.96 (Inc VAT)
|
Suitable for adjusting the position of the upper and lower guide rollers on the Vauxhall/Opel V6 EcoTec engine.Helps ensure that the timing belt is taut during installation and to assist initial belt tension.Use in conjunction with VS130 setting/locking kit. |
Quick Find Code: SEAVSE5042A
RRP : £185.94 Offer Price : £114.95 (Inc VAT)
|
Combination kit of setting and locking tools suitable for a wide range of Ford petrol & diesel engines.Also suitable for these engines fitted in Land Rover, Mazda, PSA, Suzuki and Volvo vehicles.Kit consists of camshaft, crankshaft/flywheel and tensioner locking tools, plus camshaft sprocket remover. |
Quick Find Code: SEAVSE5759
RRP : £8.34 Our Price : £6.68 (Inc VAT)
|
Camshaft setting plate required for valve timing applications on VAG 2.3, 2.8 and 2.9 chain drive engines in VW, Seat & Ford models. |
Quick Find Code: SEAVSE2357
RRP : £43.14 Our Price : £28.48 (Inc VAT)
|
Easy to use for locking camshaft pulleys when changing cam belt.Suitable for 1.4 and 1.6 16v twin camshaft petrol engines. |
Quick Find Code: SEAVSE5945
RRP : £41.94 Offer Price : £24.95 (Inc VAT)
|
Associated tool for use with a number of Ford setting/locking kits for locking the crankshaft in timed position by locating into flywheel.Also suitable for counter-holding crankshaft when releasing or tightening crankshaft pulley bolts.Used on a wide range of Ford engines particularly 1.8TDdi/TDCi and 2.0TDCi diesels, 1.6Ti-VCT and later 1.25/1.4 16v Duratec petrol engines. |
Quick Find Code: SEAVS784
RRP : £101.94 Offer Price : £49.96 (Inc VAT)
|
Tool kit for winding off tensioner load from cam belt.Ratchet wrench with multi-positional extension handle for improved access to tensioner.Kit includes sockets, hex bits and square drives.Covers a wide range of spring-loaded tensioner applications. |
Browse by brand
