Jacking Beams & Accessories
You have selected Jacking Beams & Accessories. Browse through our range of Jacking Beams & Accessories by clicking on the products or links below, or search the Jacking Beams & Accessories section by typing your keywords or product code in the search bar above.
| Showing 1 to 10 of 10 results |
Quick Find Code: SEAX137
RRP : £83.94 Offer Price : £53.50 (Inc VAT)
|
Clever device which quickly and safely overcomes the awkward job of lifting 4 x 4 vehicles with offset differentials.Simply remove the existing trolley jack saddle*, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor and you are ready to lift.Suitable for jacks with a 31-33mm saddle spigot pin, including Model No's 3000CXD, 3000LQ, 3001LE, 3003CXQ, 3010CX, 3012CXD and 3030CXD.*Note: Remove any rubber jack pad from the saddle before using to improve saf... |
Quick Find Code: SEAAPR/SL12
RRP : £11.94 Our Price : £11.10 (Inc VAT)
|
Optional safety device to prevent inadvertent removal of beam.Pins clip into upright and prevent beam riding up and out of location point.Supplied in a pack of 12 pins. |
Quick Find Code: SEAX136
RRP : £89.94 Our Price : £67.99 (Inc VAT)
|
Provides extra safety when locating awkward jacking point.Ideal for front wheel drive vehicles.Includes rubber covered saddles. |
Quick Find Code: SEASJBEX200
RRP : £1,079.94 Offer Price : £595.96 (Inc VAT)
|
2tonne Capacity and fully certified and approved to comply with VOSA requirements.Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.Supplied with two pairs of aluminium support blocks.Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.Optional hook arms supplied.Wide... |
Quick Find Code: SEASJBEX300
RRP : £1,319.94 Offer Price : £699.95 (Inc VAT)
|
3tonne Capacity and fully certified and approved to comply with VOSA requirements.Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks.Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.Optional hook arms supplied.Wid... |
Quick Find Code: SEASJBEXLP100A
RRP : £83.94 Our Price : £63.46 (Inc VAT)
|
100mm Extension adaptor for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP. |
Quick Find Code: SEASJBEXLP060A
RRP : £65.94 Our Price : £50.24 (Inc VAT)
|
60mm Extension adaptor for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP |
Quick Find Code: SEASJBEXLPFLA
RRP : £143.94 Our Price : £107.95 (Inc VAT)
|
Spring loaded flat arms with roller bearings for use with 2tonne Low Profile Jacking Beam - Model No. SJBEX200LP. |
Quick Find Code: SEASJBEX200LP
RRP : £1,379.94 Offer Price : £925.96 (Inc VAT)
|
Low profile design permits use on lifts mounted in pits and commonly used in ATLs.Also permits use on vehicles with low ground clearance.Fitted with large diameter roller support arms for use on lifts with inner rail type configuration.Ultra wide configuration arms extend to 1.6mtr and feature adjustable saddles with interchangeable height posts (optional).Tried and tested hydraulic system with double stroke pump and two-stage mechanical safety lock for added safety. |
Quick Find Code: SIP03862
RRP : £141.14 Offer Price : £77.95 (Inc VAT)
|
Gives extra safety for locating awkward jacking points.2 ton capacity |
Showing 1 to 10 of 10 results
