Replacement Filters For Respirators
You have selected Replacement Filters For Respirators. Browse through our range of Replacement Filters For Respirators by clicking on the products or links below, or search the Replacement Filters For Respirators section by typing your keywords or product code in the search bar above.
| Showing 1 to 20 of 21 results Page : 1 2 next > |
Quick Find Code: SCAPPECARTKT
RRP : £21.66 Our Price : £18.22 (Inc VAT)
|
These Scan combination A1/P2 Maxi-Mask Replacement Cartridges are suitable for use in Scan Twin Half Mask Respirators (SCAPPERESPA1 and SCAPPERESPP2). The filters provide the benefits of both A1 and P2 cartridges and thus provide protection from organic vapours and gases (medium efficiency) and dust (low efficiency).Conforms to EN14387:2004These cartirdges are supplied in a pack of 2. |
Quick Find Code: SEASSP1604FP
RRP : £35.94 Our Price : £28.46 (Inc VAT)
|
2 x A1P2 filters and 6 x prefilters. |
Quick Find Code: DR24958
RRP : £4.44 Our Price : £3.61 (Inc VAT)
|
Dust Mask & 2 Refill Pads This aluminium mask can be contoured to fit comfortably around the mouth and nose. Suitable only to reduce discomfort caused by exposure to coarse non-toxic particles where the concentration of the particles does not exceed the maximum permissible exposure. Each mask is Supplied with two replacement pads. Display packed. NB: This dust mask is NOT a respiratory protective device and SHOULD NOT be used against fine particles, gases, vapours or paint sprays. I... |
Quick Find Code: DR24959
RRP : £3.74 Our Price : £3.19 (Inc VAT)
|
Dust Mask Refill Pads (6) for 24958 This aluminium mask can be contoured to fit comfortably around the mouth and nose. Suitable only to reduce discomfort caused by exposure to coarse non-toxic particles where the concentration of the particles does not exceed the maximum permissible exposure. Each mask is Supplied with two replacement pads. Display packed. NB: This dust mask is NOT a respiratory protective device and SHOULD NOT be used against fine particles, gases, vapours or paint... |
Quick Find Code: DR13501
RRP : £19.18 Our Price : £13.37 (Inc VAT)
|
SPARE A1P2 FILTERS (2) FOR COMBINED VAPOUR AND DUST RESPIRATOR 36208 |
Quick Find Code: MOL9400
RRP : £8.12 Our Price : £8.02 (Inc VAT)
|
EASYLOCK Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. adapters or particulate pre-filters are not necessary.A1B1E1K1 protection against organic + inorganic gases & vapours + acid gases and ammonia, boiling point > 65° C. 10 x Workplace Exposure Limit (half mask)20 x Workplace Expos... |
Quick Find Code: MOL9430
RRP : £14.75 Our Price : £12.84 (Inc VAT)
|
EASYLOCK Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. Adapters or particulate pre-filters are not necessary.A1B1E1K1P3 R D protection against organic + inorganic gases and vapours + acid gases and ammonia, boiling point > 65° C. Plus protection against harmful and carcinogenic dust... |
Quick Find Code: MOL808001
Our Price : £4.60 (Inc VAT)
|
Replacement particulate filter for the 8000 series half mask. P3 R D protection against harmful and carcinogenic dusts, fumes and aerosols based on water and oil, including radioactive particulates and airbourne biological substances and enzymes. |
Quick Find Code: MOL9030
RRP : £11.04 Our Price : £5.77 (Inc VAT)
|
EASYLOCK Filters for Series 7000 & 9000 masks. No need for additional clips or holders, different gas and particulate filters can be combined. EasyLock® particulate filters can either be connected to the EasyLock® gas cartridge or directly to the mask body. adapters or particulate pre-filters are not necessary.P3 R D for protection against harmful and carcinogenic dusts, fumes and aerosols based on water and oil, including radioactive particulates and airborne biological substances... |
Quick Find Code: SCAPPECARTP2
RRP : £14.70 Our Price : £12.80 (Inc VAT)
|
These P2 Maxi-Mask Replacement Cartridges are suitable for Scan Twin Half Mask Respirators (SCAPPERESPA1 and SCAPPERESPP2). The filter provides medium efficiency protection from dust.Conform to EN143:2000.These cartridges are supplied in a pack of 2. |
Quick Find Code: SCAPPECARTP3
RRP : £26.41 Our Price : £22.22 (Inc VAT)
|
These Scan P3 Cartridges are suitable for Scan Twin Half Mask Respirators (SCAPPERESPA1 and SCAPPERESPP2). The filters provide hight efficiency protection against dust.Conforms to EN143:2000.These cartridges are supplied in a pack of 2. |
Quick Find Code: SCAPPECARTA1
RRP : £16.74 Our Price : £14.57 (Inc VAT)
|
These Scan A1 Replacement Cartridges are suitable for Scan Twin Half Mask Respirators (SCAPPERESPA1 and SCAPPERESPP2). The filter provides low efficiency protection, and suitable for use with organic vapours and gases. Conform to EN14387:2004These cartridges are supplied in a pack of 2. |
Quick Find Code: SEASSP20/2/C
RRP : £53.94 Our Price : £41.42 (Inc VAT)
|
Replacement activated carbon filter element for Model No's SSP200K and SSP200 belt assemblies. |
Quick Find Code: SEASSP21/2/CX
RRP : £80.94 Our Price : £61.19 (Inc VAT)
|
Replacement filter for Model No. SSP21X coalescing filter, included in the air-fed breathing system. |
Quick Find Code: SEASSP21X
RRP : £137.94 Our Price : £103.45 (Inc VAT)
|
Wall mounting filter designed to squeeze out particulate and moisture from the air supply.1/2"BSP Female fitting. |
Quick Find Code: VIT302647
RRP : £15.56 Our Price : £12.64 (Inc VAT)
|
The Vitrex respirator, is a high performance respirator. It has a flexible thermoplastic face-piece for optimum comfort, and a one-piece head harness with elasticated strap for easy and secure fit.The P2 filters supplied with the respirator protect lungs against fine toxic particles. Ideal for use with MDF, hardwoods, fibreglass insulation and most power tools.These multi purpose P3 filters are suitable to fit the Vitrex 30 2644 respirator. The P3 filter protects lungs against very... |
Quick Find Code: VIT331105
RRP : £17.86 Our Price : £14.50 (Inc VAT)
|
The Vitrex respirator, is a high performance respirator. It has a flexible thermoplastic face-piece for optimum comfort, and a one-piece head harness with elasticated strap for easy and secure fit.The P2 filters supplied with the respirator protect lungs against fine toxic particles. Ideal for use with MDF, hardwoods, fibreglass insulation and most power tools. |
Quick Find Code: VIT331110
RRP : £14.83 Our Price : £12.05 (Inc VAT)
|
The Vitrex respirator, is a high performance respirator. It has a flexible thermoplastic face-piece for optimum comfort, and a one-piece head harness with elasticated strap for easy and secure fit.The P2 filters supplied with the respirator protect lungs against fine toxic particles. Ideal for use with MDF, hardwoods, fibreglass insulation and most power tools. |
Quick Find Code: VIT331115
RRP : £15.56 Our Price : £12.64 (Inc VAT)
|
These multi purpose P3 filters are suitable to fit the Vitrex 30 2644 respirator. The P3 filter protects lungs against very fine toxic particles. Suitable for protection against welding fumes and when removing paint. Ideal for use with MDF, hardwoods and fibreglass insulation.Supplied in a pack of 2. |
Quick Find Code: VIT302645
RRP : £17.86 Our Price : £14.50 (Inc VAT)
|
The Vitrex respirator, is a high performance respirator. It has a flexible thermoplastic face-piece for optimum comfort, and a one-piece head harness with elasticated strap for easy and secure fit.The P2 filters supplied with the respirator protect lungs against fine toxic particles. Ideal for use with MDF, hardwoods, fibreglass insulation and most power tools.These vapour filters are suitable to fit 30 2644 respirator. They protect lungs against most organic vapours found in DIY s... |
Browse by brand
