1.5mtr Complete Industrial Workstation ComboIncludes The Following:API11 Shelf for APIBP1500APIBP1500 Back Panel Assembly for API1500API1500 Workbench Steel Industrial 1.5mtrAPI9 Double Drawer Unit for API Series WorkbenchesAPI5655B Cabinet Industrial 5 Drawer
Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage.
For a small premium over the cost of a bench drill, you can avoid tying up valuable bench space. This floor mounted drill has adjustable tilting table and rise and fall height adjustment by rack and pinion. All models are fully CE certificated and approved for use in educational establishments and the industrial workplace.
Fully polished metal gun body resists corrosion and has low affinity for paint, making this unit ideal for water based paints and easy to clean. Adjustable paint, fan width and air regulator controls. High capacity pressure pot holds up to two litres of paint per fill. This unit is perfectly suited to the commercial refinishing shop. Components from the HVLP-79/P are also available separately. Alternative set-ups available separately.
Pressured tank for maximum power. Supplied with 2.4mtr rubber hose, four ceramic nozzles and in-line water trap for moisture-free grit blasting. Also includes bayonet air line coupling and air flow regulator. Accepts a variety of grits up to 800 microns and are suitable for stripping rust and paint from wheels, chassis, panels and other corroded/painted surfaces.
All steel construction with foot operated, integral hydraulic pump and ram assembly. Fitted with safety lock device to fix platform at three working heights of 760mm, 640mm and 500mm and to prevent accidental lowering. Suitable only for motorcycles with a centre stand. Support platform fitted with full width loading ramp. Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.
Tripod mounted pipe bender suitable for bending pipes up to 180° (3 x 60° bends). Compact hydraulics with integral 15ton ram. Suitable for bending DIN classified medium and heavy pipe. Two-speed hydraulic pump gives fast positioning of pipe in dies and the power to bend up to 75mm pipe. The unit is supplied with eight interchangeable pipe dies and is packed in a heavy wooden crate for easy transportation.
Steel framework designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or body shop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.
Suitable for professional garage, body shop and industrial applications. Soft-start system incorporates twin capacitors and dump valve to provide additional punch of power and reduced back-pressure on start-up. These features combine to allow unit to be powered by 13Amp supply. Pump unit features heavy-duty aluminium cylinders with cast iron liners for durable and trouble free performance and are capped by alloy heads for improved heat dissipation. Composite drive guard is designed ...
Suitable for professional garage, body shop and industrial applications. Soft-start system incorporates twin capacitors and dump valve to provide additional punch of power and reduced back-pressure on start-up. These features combine to allow unit to be powered by 13Amp supply. Pump unit features heavy-duty aluminium cylinders with cast iron liners for durable and trouble free performance and are capped by alloy heads for improved heat dissipation. Composite drive guard is designed ...
A complete set of regulators and torches for oxygen and acetylene gas welding. Single stage gas regulators with two gauges to show bottle pressure and working pressure. 4.5mtr Twin gas hose set with hose check valves (to torch) and EN730-compliant pressure activated flash arrestors (to regulators). Welding torch with three lightweight nozzles. Cutting torch attachment with three ANMS cutting nozzles. Spark lighter. Supplied in a strong carry-case.
Bench mounting drill/mill with twelve speed reversible drive gives flexibility to handle most materials. Large surface area table with inverted T-slots facilitates securing of the largest and most awkward shapes. Supplied with Metric graduated compound scales. Complies with Safety of Machinery (Safety) Regulations 1992 (and amendments) and is fully CE approved. Supplied with 63mm face cutter,90mm angle vice, drill chuck and safety guard. Illustrated with optional floor stand Model N...
Cast steel body, suitable for oils, antifreeze, degreasants and other non-corrosive fluids. Supplied with 2"BSP adaptor and is suitable for use on 210ltr drums. Delivery approximately 0.3ltr/revolution.
Self-priming lever pump fitted with anti-drip nozzle, 2"BSP connector and dip-tube to suit 100 or 210ltr drums. Suitable for oils, antifreeze, paraffin and other non-corrosive fluids. Approximately 330ml per stroke discharge. Optional 1200mm dip-tube Model No. TP66/ACC.
Fabricated steel container with powder coated finish and spring-cap lid. Rotary type pump with clear, plastic tube delivers and retrieves oils and fluids. Fitted with rigid extension and hanging peg. Suitable for gear oil and fluids with similar viscosity.
Suitable for applying finishing coats. 2-Stage trigger control and 0.5ltr plastic gravity feed pot. Adjustable spray width and fluid flow. Maintenance tools supplied. Suitable for use with water based paints. Alternative set-ups available separately.
Fan-cooled AC/DC power supply for TIG and arc welding applications. Suitable for welding steel, deoxidised copper, nickel, titanium and aluminium. LED power read-out with push-button programming in conjunction with an encoder knob. The unit features regulation of post-gas and current down-slope time as well as control of AC balance and arc force. When TIG welding, the current can be set to change from one preset value to another using the torch button.HF or lift start (for reduced H...
2ton Capacity and fully certified and approved to comply with VOSA requirements. Features two-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift ...
Powerful, Third Generation die grinder. Contoured handle insulates user from chill and vibration. Directional, low noise air exhaust can be rotated 360° giving operator added protection. Includes 4-position air valve and throttle safety device. Supplied with set of Ø6mm grinding points, chuck wrenches and carry-case.
Steel fabricated 65ltr reservoir and 50ltr one-piece tank. Mobile unit which, with two castors and two fixed wheels, can be easily taken to work area. Air operated unit can be charged and used remotely without air supply for a limited period. Includes brush for cleaning workpiece and air blow gun for fast drying. Reservoir fitted with fluid level indicator and drain tap. Supplied with removable shelf and tray. Lid fitted with fusible link which automatically snaps lid shut in the ev...
Showing 1 to 20 of 353 results
Page : 1234567 ... 18next >
